I'm having some problem filtering ospf routes on my css11150. is there any way to block inbound ospf route advertisments (similar to the router ios distribute-list in/out command ??)
when the css looses it's default route to the internet through my edge router, my pm4 box is becoming the deafult route via ospf propegation. when the edge router comes back, it becomes the default again, and any new traffic gets routed out ok, but the existing flows that get diverted to the pm4 remain that way and I end up having to restart my css to clear everything :o(
can this be done on the css, or do I need to slap a router between my css and my pm4 to do the blocking for it ??
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...