We have three Cisco CSS 11501 and have some intermittent problems with timeouts for a web-based application. After reading threads in this forum I have concluded that increasing the flow-timeout-multiplier could solve the issue.
We are terminating HTTPS connections in our CSSs and then use HTTP for the connections to the server. Should the flow-timeout-multiplier be applied on the HTTPS or HTTP content rule, or both?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...