What is the TCP timeout on CSM between for a request (ex a SYN) and a response (SYN/ACK)?
Are the reverse-sticky with predictor leastconns or predictor hash only for FTP-like application? Why do you use reverse-sticky?
And last question:
if i use the predictor forward to forward traffic through CSM, ( i suppose that thet traffic is matched by the 5 CPU of the CSM), is CSM add latency time
on the request ? (i use 2 CSM via FW Load-balancing on each part - and i have 5 parts)
FYI: I load-balance FW through CSM without reverse-sticky and sticky. It is worked. Yesterday, the application didn't work. So i put sticky and reverse sticky (as Cisco recommend) , and my manager said me that it is not a solution but a workaround...
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...