I know a lot of customers like to implement both at the same time, so that FWSM can give protection to CSM. Can someone point me to the same config that talks about how to configure the 2 together. I remember looking at the config where the FWSM was configured in transparent mode and then the CSM was place behind the FWSM. But, there was a catch to the config which i forget.
so lets say my fwsm is bridging between vlan 10 and 11, will the csm vip be in vlan 11 (high security interface on the fwsm), will this work, where would my real servers reside, has anyone tested this and could share a sample config please.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...