Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

get the statistic on Local Director through snmp

Dear all,

I try config on local director,

{

ip address 192.168.1.254 255.255.255.0

snmp-server host(ip)

snmp-server community public

}

so, I used the snmp manager to get the statue of local director 192.168.1.254, but responses as shown below

<Interface list for 192.168.1.254

Reply packet reported error, index = 1>

Could some one can help us.

Many thanks

2 REPLIES
Blue

Re: get the statistic on Local Director through snmp

Make sure that the host from where you're doing the snmppoll is in LD config and secondly, LD responds only to SNMP v2c requests. Check your syntax.

New Member

Re: get the statistic on Local Director through snmp

Hi,

I download the file ld-mibv2.my, & compile into Net inspector (MG-Soft), normally get the error message & cannot compile, Please advise

186
Views
0
Helpful
2
Replies
CreatePlease to create content