Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

gss image upgrade

greeting,

I have tried to upgrade image version from 2.0(2) to 3.0(2) for my GSS4492R.

according the gss upgrade doc for version 3.0 I did:

gss4492r#gss stop

gss4492r#install gss-3.0.2.0.0-k9.upg

File: gss-3.0.2.0.0-k9.upg

Size: 190720041

Md5sum: 3f1e74d26dc0e4fcaae4759b574009c9

Proceed with install (the device will reboot)? (y/n): y

Performing software install. This will take a few minutes.

If you close this session, the installation will still complete.

% Upgrade failed: The install script from the upgrade file failed.

% The GSS is not running.

It seems can not upgrade for me. Could I get some advice about the problem?

Any comment will be appreciated'

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

Re: gss image upgrade

Hi,

You can't upgrade from 2.0(2) to 3.0(2) directly, as there is an intermediate upgrade required.

See this link about the sequence:

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/gss4400series/v3.0/administration/guide/Upgrades.html#wp1010257

HTH

Andrew.

1 REPLY

Re: gss image upgrade

Hi,

You can't upgrade from 2.0(2) to 3.0(2) directly, as there is an intermediate upgrade required.

See this link about the sequence:

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/gss4400series/v3.0/administration/guide/Upgrades.html#wp1010257

HTH

Andrew.

231
Views
0
Helpful
1
Replies