cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
404
Views
0
Helpful
1
Replies

GSS-TCP-Keepalive

cisco123456
Level 1
Level 1

The documentation states this command is used to designate the interface that is used for GSS keepalive communication. Are these keepalives used for GSS to GSS communication? Or are these keepalives for health checking VIPS? How does this command relate to the gss-communications command? Do both commands need to be applied to the same interface?

1 Reply 1

peucale
Level 1
Level 1

Hi,

- gss-tcp-keepalive is used in interface config mode to specify the interface that is used for all the keepalives the GSS sends.

- gss-communication designates the interface IP address that the GSS uses for inter-device communication.

- these commands do not have to be configured on the same interface.

- the keepalives are used to monitor configured services. The state is then used to decide which service will receive requests.

-alex

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: