Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

HA with ACE and ACE-4710

Hello,

it's possible configure high availability with one ACE module and second ACE-4710 appliance?

thanks,

martin

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: HA with ACE and ACE-4710

To be more specific than No...

Here are the Configuration Requirements and Restrictions for the ACE

Follow these requirements and restrictions when configuring the redundancy feature.

•Redundancy is not supported between an ACE appliance and an ACE module operating as peers. Redundancy must be of the same ACE device type and software release.

2 REPLIES

Re: HA with ACE and ACE-4710

NO...

Syed

New Member

Re: HA with ACE and ACE-4710

To be more specific than No...

Here are the Configuration Requirements and Restrictions for the ACE

Follow these requirements and restrictions when configuring the redundancy feature.

•Redundancy is not supported between an ACE appliance and an ACE module operating as peers. Redundancy must be of the same ACE device type and software release.

264
Views
0
Helpful
2
Replies