Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

health check and arp issues on standby ace

Folks

I have ace setup as active/standby . What we are noticing is on primary ace we can ping servers but on secondary we can't ping some servers

See below

From Primary ACE:

EWDC-T1ACE12-1/Education# ping 172.28.8.84

Pinging 172.28.8.84 with timeout = 2, count = 5, size = 100 ....

Response from 172.28.8.84 : seq 1 time 0.243 ms

Response from 172.28.8.84 : seq 2 time 0.434 ms

Response from 172.28.8.84 : seq 3 time 0.221 ms

Response from 172.28.8.84 : seq 4 time 0.203 ms

Response from 172.28.8.84 : seq 5 time 0.190 ms

5 packet sent, 5 responses received, 0% packet loss

EWDC-T1ACE12-1/Education# show probe detail ?

| Output modifiers.

> Output Redirection.

<cr> Carriage return.

EWDC-T1ACE12-1/Education# show probe detail |include 172.28.8.84

172.28.8.84 4778369 49 4778320 SUCCESS

172.28.8.84 2867010 8611 2858399 SUCCESS

172.28.8.84 2867010 8611 2858399 SUCCESS

172.28.8.84 2867011 438 2866573 SUCCESS

172.28.8.84 2867011 438 2866573 SUCCESS

EWDC-T1ACE12-1/Education#

From Stanby ACE:

EDMZ-T1ACE12-2/Education# ping 172.28.8.84

Pinging 172.28.8.84 with timeout = 2, count = 5, size = 100 ....

No response received from 172.28.8.84 within last 2 sec

No response received from 172.28.8.84 within last 2 sec

No response received from 172.28.8.84 within last 2 sec

No response received from 172.28.8.84 within last 2 sec

No response received from 172.28.8.84 within last 2 sec

5 packet sent, 0 responses received, 100% packet loss

EDMZ-T1ACE12-2/Education#

EDMZ-T1ACE12-2/Education#

EDMZ-T1ACE12-2/Education# show probe detail |include 172.28.8.84

172.28.8.84 0 0 0 INIT

172.28.8.84 2733 2733 0 FAILED

172.28.8.84 2733 2733 0 FAILED

172.28.8.84 2733 2733 0 FAILED

172.28.8.84 2733 2733 0 FAILED

EDMZ-T1ACE12-2/Education#

I also ran some debug . Look for 172.28.8.84 in the file attached. Any ideas what could be wrong?

2 REPLIES
Silver

Re: health check and arp issues on standby ace

Hi,

If found this in your trace:

2009 Apr 29 23:00:24.579199 arp/icmp mgr: (ctx:1)ICMP echo request (len 108 id 8193 seq 1) to 172.28.8.84

2009 Apr 29 23:00:24.579233 arp/icmp mgr: (ctx:1)icmp_transmit_pkt: Transmit packet entered length = 100

2009 Apr 29 23:00:24.579282 arp/icmp mgr: (ctx:1)icmp_transmit_pkt: Memsetting data length = 100

2009 Apr 29 23:00:24.579406 arp/icmp mgr: (ctx:1)icmp_transmit_pkt: send_traffic: error -11 from ed_write_pkt: Resource temporarily unavailable

Could you perform a reboot of the standby ACE?

Never saw this problem. What version are you using?

New Member

Re: health check and arp issues on standby ace

I don't want to reboot I want cisco to tell me whats wrong?

226
Views
0
Helpful
2
Replies
CreatePlease login to create content