Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Help neded: CSS VIPs visible from servers

Hi,

I have CSS configured with two vlans. VLAN 202 (client side) and VLAN 201 (server side). I have defined virtual interface on vlan 202 that is bound to content Oracle_INFRA. Load balancing works just fine,clients can see VIP etc., but the problem is that contents VIP (10.0.18.129) needs to be visible from content servers(10.0.19.131,132). Is there any way to do this?

Config is in the attachment.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Help neded: CSS VIPs visible from servers

You need to nat the server ip when they contact the vip in order for this to work.

The following config will just achieve this.

group client-nat

vip add 10.0.18.129

add service CRSIDM01_INFRA

add service CRSIDM02_INFRA

active

Gilles.

3 REPLIES
Cisco Employee

Re: Help neded: CSS VIPs visible from servers

You need to nat the server ip when they contact the vip in order for this to work.

The following config will just achieve this.

group client-nat

vip add 10.0.18.129

add service CRSIDM01_INFRA

add service CRSIDM02_INFRA

active

Gilles.

New Member

Re: Help neded: CSS VIPs visible from servers

Hi Gilles,

It works.

Thanks,

Branimir

New Member

Re: Help neded: CSS VIPs visible from servers

Also if you want to mask the source IP as the VIP you can use "add destination service" vs "add service".

If you want to see the source as the VIP's IP.

FYI

Dr. Rajinder Uppal

148
Views
9
Helpful
3
Replies