Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

how can I configure two cross-over cable for Redundancy css 11151

hi,all

We have two css11151 connect to PIX(fail-over) ,and we use two cross-over cable between the css, how can I configure it?

1.two separate Circuit vlan ?

2.float IP?

Thanks and with regards.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: how can I configure two cross-over cable for Redundancy css

sorry but I'm not sure what you want to configure ?

If you want to configure redundancy, first tell us what type of redundancy

-box-to-box ?

- vip redundancy ?

- interface redundancy ?

The first type requires a special link between the 2 CSS. But only one.

It will not work if you put 2 links.

The last 2 do not require a back-to-back connection between the CSS.

So, please tell us what is the current design and what is it you're trying achieve.

Thanks,

Gilles.

1 REPLY
Cisco Employee

Re: how can I configure two cross-over cable for Redundancy css

sorry but I'm not sure what you want to configure ?

If you want to configure redundancy, first tell us what type of redundancy

-box-to-box ?

- vip redundancy ?

- interface redundancy ?

The first type requires a special link between the 2 CSS. But only one.

It will not work if you put 2 links.

The last 2 do not require a back-to-back connection between the CSS.

So, please tell us what is the current design and what is it you're trying achieve.

Thanks,

Gilles.

166
Views
0
Helpful
1
Replies
CreatePlease to create content