Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How can integrate IPS and WAAS???

I have been working a lot with troubles to integrate an IPS 4240 in my WAAS plataform. A lot of signatures comes up when I have actived IPS. I found out some tips about disabled specific signatures and install the appliance in IDS mode.

¿Anybody known how i can conduct a transparently integration with these technologies?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: How can integrate IPS and WAAS???

When the IPS sensor is placed outside of the optimization path, then both IPS and WAAS will work well. The IPS sensor blocks the TCP option 21 that WAAS uses to initiate the WAAS setup. The IPS sensor cannot handle the sequence number manipulation that WAAS currently uses. It's outside the RFC and the sensor will block those packets by default.

1 REPLY
Bronze

Re: How can integrate IPS and WAAS???

When the IPS sensor is placed outside of the optimization path, then both IPS and WAAS will work well. The IPS sensor blocks the TCP option 21 that WAAS uses to initiate the WAAS setup. The IPS sensor cannot handle the sequence number manipulation that WAAS currently uses. It's outside the RFC and the sensor will block those packets by default.

299
Views
0
Helpful
1
Replies
CreatePlease login to create content