Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How/Can you configure SNMP community strings on the GSS 4480?

Global Site Selector (GSS)

Copyright (c) 1999-2002 by Cisco Systems, Inc.

Version 1.0(0.24.3)

Compiled Sat Aug 3 22:07:48 2002 by atripath - changeset 25268

uptime is 83 Days 23 Hours 59 Minutes and 1 seconds

Model Number: GSS-4480-K9

3 REPLIES
Silver

Re: How/Can you configure SNMP community strings on the GSS 4480

The GSS contains an SNMP agent, that enables you to query your GSS devices. SNMP runs on GSS port 161 by default. The configuration of community strings doesn't seem to be documented. use the snmp enable global command to enable snmp on the box.

Community Member

Re: How/Can you configure SNMP community strings on the GSS 4480

We actually have this setup on the GSS boxes, but we cannot get our netmanagement systems to completely discover the device due to the community string issue. Do you know if this will be an option in upcoming software releases?

Thanks for the ressponse!

Spencer

Cisco Employee

Re: How/Can you configure SNMP community strings on the GSS 4480

Spencer,

here you go :

To configure the community string:

1) in config mode (config)#property set Snmp.CommunityString newString

2) (config)#no snmp enable

3) (config)#snmp enable

Gilles.

831
Views
1
Helpful
3
Replies
CreatePlease to create content