How do I session into a NME-WAE-522 device if SSH only?
When I allowed telnet access to the NME-WAE-522, I could session into it from the 3845 router interface OK. Then I allowed for only SSH access (disabled telnet) and can no longer gain access when I submit the following command:
Re: How do I session into a NME-WAE-522 device if SSH only?
If the Cisco WLCM has no prior configuration, the configuration wizard is automatically invoked. You cannot bypass the configuration wizard. Through the CLI, you must provide the information at the prompts provided.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...