How to config CSM load balance of http combined https
In this case,when I config CSM for load balance http and https service separately was ok.2 VIPs , 2 Serverfarms, One for http , and one for https .But I found that the https would referred to http information on IIS , because when the client first to access http is ok,and then login by https ,the information is not right.So,how to config CSM in this case,any reply will be very be appreciated.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...