Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure stickiness on ACE20 ?

Config attached....

I have set-up 2 ace20's for SLB which works fine, however I am struggling to understand how to configure stickiness in the way I want to. I want any user on the network whom connects to any of the 5 rservers to have a sticky time of 60 minutes as requested by the application vendor, the app is http.

The network is subnetted and all subnets fall within the ranges 172.16.0.0/12 and 192.168.0.0/16. Can any one help me with the sticky configuration. As you can see from my config I started to configure this but do not quite understand how to classify the traffic and associate it with the serverfarm.

I am new to content switching.

Thanks

Paul Tribe (CCNA, CCMP, CCSP)

Technical Analyst

Nottingham City Council (UK)

Tel - +44 (0)115 915 4119

3 REPLIES
New Member

Re: How to configure stickiness on ACE20 ?

Config now attached !

New Member

Re: How to configure stickiness on ACE20 ?

You have stickiness configured but it has not been applied. Try this:

policy-map type loadbalance first-match L7_VIP_LB_ORDER_POLICY

class class-default

sticky-serverfarm Carefirst

Note the change in the last line. This applies the sticky rule. Hope this helps.

New Member

Re: How to configure stickiness on ACE20 ?

Thanks I had eventually worked it out but you are absolutely right.

163
Views
0
Helpful
3
Replies