Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

New Member

How to create client/server VLANs after FWSM towards ACE Module

Hi,

In the concerned design, the client/server vlans are on the inside of the FWSM. So for e.g. FWSM inside is VLAN100 which receives client hits which also has the servers connected.

I believe a different vlan needs to be created for the client and servers such as VLAN100 for client and VLAN101 for servers and then these should be bridged.

Now, VLAN100 is shared between FWSM inside and ACE Client. So, how will the vlan-group be defined on the MSFC in this scenario.

Regards.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to create client/server VLANs after FWSM towards ACE Mod

1 REPLY

Re: How to create client/server VLANs after FWSM towards ACE Mod

151
Views
0
Helpful
1
Replies
CreatePlease to create content