Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

How to Disable cache for an especific Site??

How i can disable in the CE 507 the Cache for one Web Site???

2 REPLIES
Bronze

Re: How to Disable cache for an especific Site??

New Member

Re: How to Disable cache for an especific Site??

The reply at the link says to configure a rule for "no-cache". This will not prevent the CE from making the request, it only tells the CE to not Cache it.

Reading the question, I am not sure of exactly what the request is, but if the goal is to have the client go directly to the server, there are multiple ways to do this.

If you want the client to make the connection to the site, you can you a redirect list on the WCCP router

In the following example, traffic to 172.18.124.193 will not be redirected to the CE, but will go directly to the server.

router# configure terminal

router(config)# ip wccp web-cache redirect-list 120

router(config)# access-list 120 deny ip any host 172.18.124.193

router(config)# access-list 120 permit ip any any

Or, you can create a static bypass entry on the CE using the bypass command. Bypass, like the router redirect list, requires the use of WCCP.

122
Views
0
Helpful
2
Replies
CreatePlease to create content