Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to re-registrate a WAE at CM after changing the IP Address

Hello all,

we have trouble with "changing the WAE's IP Address after the device was registered to CM.

A registration of a device which was registrated with another IP Address is no more possible.

the following error occurs on the "sh CMS info" command:

Status = Pending(CM is busy, retry later)

4 REPLIES
Silver

Re: How to re-registrate a WAE at CM after changing the IP Addre

Hi Dieter,

Please let us know what version of software you are running.

(In version 4.1.1)

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v411/command/reference/execmds.html#wp1680452

On the WAE which you changed the IP address do this:

CMS deregister force

The cms deregister command removes the node from the WAAS network by deleting registration information and database tables.

cms enable

The cms enable global configuration command automatically registers the node in the database management tables and enables the CMS. Activate the node using the WAAS Central Manager GUI.

Then to verify:

show license

add license (if necessary)

show accelerator

Make sure to reconfigure the primary interface if needed.

Hope this helps point you in the right direction.

Best,

Paul

New Member

Re: How to re-registrate a WAE at CM after changing the IP Addre

Hi Paul,

thanks for your response.

Yes we have 4.1.1 in use.

Version: oe612-4.1.1b.15

Currently the WAE is powered down.

I'll try to deregister the WAE, as soon as it is online again.

I'll let you know the outcome, as soon as possible

regards

Dieter

here the current status of the WAE

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

nbrwa222#sh cms info

Device registration information :

Device Id = 427442

Device registered as = WAAS Application Engine

Current WAAS Central Manager = 10.24.254.10

Registered with WAAS Central Manager = 10.24.254.10

Status = Pending(CM is busy, retry later)

Time of last config-sync = Fri Dec 19 10:17:46 2008

CMS services information :

Service cms_ce is running

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

New Member

Re: How to re-registrate a WAE at CM after changing the IP Addre

Hi Paul,

thanks for your help.

after the "deregister force" command we were able to register the WAE again.

Thanks for your help.

Dieter

New Member

Re: How to re-registrate a WAE at CM after changing the IP Addre

I was just browsing and stumbled across thsi 3 year old post which had the exact information that I needed. 

"CMS Deregister force"

Big thanks, wish I could vote your answer the correct answer.

2063
Views
10
Helpful
4
Replies