Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to setup a (2 tier) Client - Server arch.

How can I use two machines to establish a client-server arch.

What are possible scenarios ?

&

What sw,hw I will require in each scenario ?

2 REPLIES
Cisco Employee

Re: How to setup a (2 tier) Client - Server arch.

back to basics here.

1 machine is the client and the other one the server.

Basic: the client telnet to the server. You just need a server that allows telnet.

Or slightly more complex, the client open a connection the web server to download a page.

You then need a browser on the client and a web application on the server.

Your question is very generic.

If you are in the learning process, I would suggest to buy a book on tcp/ip and start from there.

Gilles.

Community Member

Re: How to setup a (2 tier) Client - Server arch.

Gilles Dufour wrote:

back to basics here.

1 machine is the client and the other one the server.

Basic: the client telnet to the server. You just need a server that allows telnet.

Or slightly more complex, the client open a connection the web server to download a page.

You then need a browser on the client and a web application on the server.

Your question is very generic.

If you are in the learning process, I would suggest to buy a book on tcp/ip and start from there.

Gilles.

I got more deep understanding about this part, Thanks for your sharing!

267
Views
0
Helpful
2
Replies
CreatePlease to create content