03-20-2007 01:33 AM
I'm a newbie concerning CE's and i want to transfer logfiles of a CE512 proxy from the cmdline to an ftp-server, which cmd should i use ?
Thanks,
Peter
Solved! Go to Solution.
03-20-2007 10:55 AM
Hi Peter,
Make sure you are in the right directory before copying the files off the CE, to do so, follow these steps:
- go the exec mode
- type '#cd logs' --> this will place you in the logs directory.
- use the command: 'copy disk ftp...'
Here is the reference: http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns54/54cref/8158ref.htm#wp1040872
If you want to know the files available on an specific directory, use this command: '#dir'
I hope this helps.
Thanks!
Jose.
03-20-2007 10:49 AM
03-20-2007 10:55 AM
Hi Peter,
Make sure you are in the right directory before copying the files off the CE, to do so, follow these steps:
- go the exec mode
- type '#cd logs' --> this will place you in the logs directory.
- use the command: 'copy disk ftp...'
Here is the reference: http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns54/54cref/8158ref.htm#wp1040872
If you want to know the files available on an specific directory, use this command: '#dir'
I hope this helps.
Thanks!
Jose.
03-20-2007 01:04 PM
Thanks.
Peter
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: