We're deploying 2 arm design in conjunction with 512 WAE devices. We have also configured WCCP redirection on the edge routers to the 512 WAE and currently deploying the HSRP between these routers. Does anybody happen to know if Cisco recommends using HSRP or GLBP in a case like this?
regardless of what type of virtual gateway you have, the client packets will get redirected to the WAEs. The difference in destination mac addresses will not afect the WCCP loading hash or asymetric traffic flows.
Your accelerated CIFS sessions may take a different path than the original client data if you use GLBP but it will not affect operation.
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...