I am trying to set up a config in a one armed design with client connecting via https that should be redirected to differents http servers (some are port 80 others 8080 and 9000) and depending on the end of the HTTPS url I have to rewrite the end of the url to connect to the right application on the server.
Thanks for the feedback, can you just let me know how you send the clear text traffic to a vip and the port 81, can i do that in the ssl-proxy-list by changing ssl-server 100 cipher rsa-with-rc4-128-md5 172.17.64.130 80 to ssl-server 100 cipher rsa-with-rc4-128-md5 172.17.64.130 81 ?
for the redirection can you explain a bit more or send a sample of conf.
Because i need to change the url and the port like following:
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...