Is anyone running the HSS on IBM hardware? Cisco specifies an IBM xSeries 336 8837E2U, but this model has been removed from the IBM website. The replacement from IBM is an xSeries 883725U, which is not officially recommended by Cisco. I have a TAC case opened and I am waiting for a response as to what other platforms HSS will run on. I just thought I would ask for comments on the HSS and what IBM platforms people are using. I currently run an HSE, but this platform is EOL.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...