Fast Ethernet interfaces 0/2 to 0/5 are connected to the clients and they are configure as :ip wccp web-cache redirect in .And Fast Ethernet interface 0/1 is connected to the cache engine and it does not configure as : ip wccp web-cache redirect out.
The sample in this doc is configure as :ip wccp web-cache redirect out.
I want to know the different of :ip wccp web-cahe redirect out and ip wccp web-cache redirect in. And in which condition I shall use ip wccp web-cache redirect out and in which condition I shall use ip wccp web-cache redirect in ?
The ip web-cache redirect in command is only a new addition in the late 12.1 and 12.2 train of IOS. Both commands do the same thing except the redirect in is on the interface where client sourced traffic enters the router and the redirect out is on the interface interface of the router. You do no use both at the same time.
My preference is for redirect in as the router does not need to route the packet because wccp picks the packet up on the incomming interface.
The unmanaged mode is also known as Network only switching, which is introduced in Brazos release. It adds the flexibility for customer to use only network automation for service appliance.
If a device is configured a...
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...