Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IMAPS

Has anyone tried to terminate IMAPS on ACE or CSS11501? thx.

2 REPLIES
Silver

Re: IMAPS

As far I know CSSand CUE 2.3 supports IMAP ports. Refer URL for more information http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/cliadmin/ch_imap.html#wp1065580

yes you can do this.

All these protocols use TCP.

IMAP uses port 143

SMTP uses port 25

....

So, you can either do 1 content rule to loadbalance all traffic (UDP/TCP) and you do not care about what it is.

Or you can have 1 content rule for only TCP traffic.

Finally, you could 1 content rule for each protocol you mentioned.

I don't think there is anything special to do.

example #1:

owner MyCompany

content MyServers

vip address x.x.x.x

add service s1

add service ...

active

!!! this is if you do a layer 3 rule. So, all traffic is loadbalanced

example #2:

owner MyCompany

content IMAP

vip address x.x.x.x

protocol tcp

port 143

add service ....

active

New Member

Re: IMAPS

what I would like to achieve is terminate tcp 993 and 995.

172
Views
0
Helpful
2
Replies
CreatePlease to create content