Re: Infrastructure Help Where to Place the Cache 505
This depends on where your wccp router is located. The rule of thumb is to place the cache engine closest to the clients.If your wccp router is on the outside of the firewall and your CE is either on the inside or DMZ you would have to create a conduit for GRE and a static for translation for the CE. Keep in mind that by placing the CE on the inside or the dmz, there will be extra traffic going through the pix because of the wccp redirection.
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...