Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

insert-http X-Forwarded-For header-value into HTTPS policy

Hello,

I have successfully used the "insert-http X-Forwarded-For header-value "%is" into a policy-map to allow the source IP to come through on a port 80 rule, but how do I do the same for a 443 rule?  I am currently passing through the 443 and terminating on the servers, do I have to terminate SSL on the ACE to use the "insert-HTTP"?  And, if that is the case, do I still use the same "insert-http" in the policy map?

Thanks,

Dave

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: insert-http X-Forwarded-For header-value into HTTPS policy

Yes, you would need to terminate SSL on the ACE in order to insert this header.

Yes, the command syntax to insert the header is the same.

2 REPLIES
Cisco Employee

Re: insert-http X-Forwarded-For header-value into HTTPS policy

Yes, you would need to terminate SSL on the ACE in order to insert this header.

Yes, the command syntax to insert the header is the same.

New Member

Re: insert-http X-Forwarded-For header-value into HTTPS policy

rocash,

Thanks!

Dave

1901
Views
0
Helpful
2
Replies