After installation of ANM 2.0 and got a demo license I don't know how to install it. The path /opt/CSCOcbt/httpServer/webapps/ROOT/WEB-INF/classes/lic does not exist, and the install program /opt/CSCOanm/bin/anm-license gives error: Error: MAC address of license does not match MAC address of eth0.
Did you enter the correct MAC address of ETH0 when requesting the demo license?
"Please enter below the 12 digits of the MAC address of Ethernet Interface 0 (eth0) of the server hardware on which you will be installing your Cisco Application Networking Manager software. The following command can be executed on your server to provide you with the required information.
command> /sbin/ifconfig eth0 | grep -i hwaddr | sed 's/://g'
response> eth0 Link encapEthernet HWaddr 00C09F6063D0
In the above example, the required MAC address to enter here is:00C09F6063D0"
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...