Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Internal Load Balancing. With local Director?

I use LD 416's for internet web site load balancing. works great. I'm looking to load balance some intranet web sites and some DCOM or COM+ servers. Will LD balance COM+/DCOM? Clients are connected at 10/100 and servers are at 1000. Wont the LD be a bottleneck in this scenario? I looked at Accelerated Server Load Balancing since we have a 6500 series but we have a SUP2/MSFC2/PFC2 and it says that it only works with SUP1/MSFC1/PFC1. What are my options ?

1 REPLY
New Member

Re: Internal Load Balancing. With local Director?

I don't konw what COM+ or DCOM servers are, but

if it's TCP/IP traffic, there should be no problem.

The LD's will be bottle-necks only if the throughput does

exceed 400 meg/sec. The LD's can have GigabitEthernet

cards.

Have you considered IOS-SLB which runs on the 6500's

running Native IOS?

178
Views
0
Helpful
1
Replies