Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started.

New Member

IOS SLB RADIUS loadbalancing

Hi Guys,

can anyone confirm or point out errors in this config that I wish to pop on our 6509. We don't have a test environment, so I need to get as much feedback as I can on this.

Thanks in advance,

James

no natpool WSB_RADIUS 10.176.57.115 10.176.57.115 netmask 255.255.255.128

no serverfarm WSB_RADIUS

no serverfarm WSB_RADIUS_NAT

no policy WSB_RADIUS_NAT

no vserver WSB_RADIUS

no probe WSB_RADIUS_AUTH udp

ip slb serverfarm WSB_RADIUS

nat server

real 10.176.57.38

faildetect numconns 8 numclients 1

inservice

real 10.176.57.39

faildetect numconns 8 numclients 1

inservice

real 10.176.57.40

faildetect numconns 8 numclients 1

inservice

real 10.176.57.41

faildetect numconns 8 numclients 1

inservice

ip slb vserver WSB_RADIUS

virtual 10.176.57.115 udp 1813 service radius

serverfarm WSB_RADIUS

idle radius request 2

inservice standby WSB

interface Vlan130

standby 130 name WSB

  • Application Networking
1 REPLY
Silver

Re: IOS SLB RADIUS loadbalancing

IOS SLB provides RADIUS load-balancing capabilities for RADIUS servers. In addition, IOS SLB can load-balance devices that proxy the RADIUS Authorization and Accounting flows in both traditional and mobile wireless networks, if desired. IOS SLB does this by correlating data flows to the same proxy that processed the RADIUS for that subscriber flow.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1833/products_feature_guide09186a00802081ce.html#wp2889077

182
Views
2
Helpful
1
Replies