no - if the vip are part of a subnet define in a circuit, the css must be configured with redundant-vip.
If you want to avoid this, you have to use for your vip address a subnet that does not exist on the css. You then need to configure only 1 redundant-ip and use this ip on the next router to configure a static route for the vip subnet pointing to the CSS.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...