Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

is it possible to log in to ACE module on 6509

Hello,

 

We have run into the issue where we are unable to log in to ACE which is module on 6509 from outside. Is it possible to log in to ace module from switch itself from 6509?

I have tried remote login and remote command nothing worked...?

Any help would be appreciated.

 

Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi,Did you try "session slot

Hi,

Did you try "session slot x processor 0". X would be the slot in which you have ACE module. Show module on switch should show that.

If the ACE is in ROMMON mode you can follow the below link for remote login and boot.

http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Troubleshooting_Guide_--_Troubleshooting_ACE_Boot_Issues

 

Regards,

Kanwal

3 REPLIES
Cisco Employee

Hi,Did you try "session slot

Hi,

Did you try "session slot x processor 0". X would be the slot in which you have ACE module. Show module on switch should show that.

If the ACE is in ROMMON mode you can follow the below link for remote login and boot.

http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Troubleshooting_Guide_--_Troubleshooting_ACE_Boot_Issues

 

Regards,

Kanwal

New Member

That worked thank you so much

That worked thank you so much for quick help.

 

Regards,

Cisco Employee

Hi,I am glad it helped you

Hi,

I am glad it helped you.

You are welcome!

Regards,

Kanwal

395
Views
0
Helpful
3
Replies
CreatePlease login to create content