Hoping someone could shed some light on an issue we are having. We have an ACE with one front end vlan and two different VLANS in the back end. All rservers are operational in both back end Vlans and all probes are succsesful. The issue we are having is that we have setup two VIPS in the front end VLAN one for each of the Backends. However only the first of these VIPs is up and present in the arp table.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...