In a GSS, I can configure the KAL-AP properties under the ressources Tab. If I select KAL-AP Type = Fast, I can define the number of retries and the keepalive interval is automatically set by the GSS. Now, if I select KAL-AP Type = Standard, The only parameter is "minimum interval". What is the exact meaning of this parameter ? what would be the number of retries if I set minimum interval = 30 seconds ?. What is the Cisco recommended type ? Fast or standard ?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...