Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Keepalives and "ip address range" in a service

Can anyone explain the relationship between a keepalive and a range of IP addresses in a service definition? If I have a range such as "ip address 172.18.2.120 range 4", the set a tcp keepalive, will the tcp keepalive evaluate all the addresses in the range. Will it then include the active addresses in the possible translation pool, or is it an all-or-nothing proposition?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Keepalives and "ip address range" in a service

no - only the first address of the range will be use for the keepalive.

If it goes down, the all service goes down.

I confirmed this by testing it in the lab with 5.03(26)

Gilles.

1 REPLY
Cisco Employee

Re: Keepalives and "ip address range" in a service

no - only the first address of the range will be use for the keepalive.

If it goes down, the all service goes down.

I confirmed this by testing it in the lab with 5.03(26)

Gilles.

219
Views
0
Helpful
1
Replies