Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

L3 loadbalancing based on srcip

I've got a question regarding L3 loadbalancing based on srcip. We've got this configured on a css11501 for a terminal server farm. How long does the css remeber to wich service a thinclient is redirected by the css. And can i set a timeout for this.

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: L3 loadbalancing based on srcip

HI,

the default value is 0 which means this feature is disabled. You can configure this with the sticky-inact-timeout compare to: http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_configuration_guide_chapter09186a00800d6b35.html#34248

Regards,

joerg

1 REPLY
Bronze

Re: L3 loadbalancing based on srcip

HI,

the default value is 0 which means this feature is disabled. You can configure this with the sticky-inact-timeout compare to: http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_configuration_guide_chapter09186a00800d6b35.html#34248

Regards,

joerg

97
Views
0
Helpful
1
Replies