LB COM+ Traffic?

[b-hamm]

Has anyone used the CSS to balance COM+ traffice? Developers have separated the COM+ from the IIS components for security reasons so the desire is have the IIS servers talk to a VIP representing multiple COM+ servers.

Thanks,

Brian D. Hamm

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[paul.pearston]

Hi Brian,

I have some developers attempting to do similar with multiple COM+ applications installed on number of different servers, which are attached to three separate VLANs. Therefore, each physical server is a client of a number of other load-balanced services. Which is causing me some routing issues in addition to the COM+ traffic as all traffic between VLANs must be routed through a CheckPoint firewall as opposed to the CSS.

Any advice would be greatly appreciated?

Thanks,

Paul