I have some real servers that are configured into multiple serverfarms. If I configure the pedictor of a serverfarm as leastconns, does it take into account only the connections within this serverfarm to a particular real server or does it take into account all connections towards a particular real server over the different serverfarms?
serverfarm host SF1
serverfarm host SF2
Let's assume the following situation:
RS1: 100 connections active
RS2: 120 connections active
RS1: 60 connections active
RS2: 50 connections active
What will then happen for a new connection on SF2:
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...