Re: Load Balanced server can not browse to Virtual IP
this is the typical problem.
When going from server to vip, the problem is that the receiving server, will see the request coming from a device on a locally attached network and it will send the response to the server/client directly without going through the CSS.
Therefore, the client receives a response from an unknown device since the CSS could not nat the response back to the vip address.
The only solution is to nat the server_client ip when it connects to the vip so it forces the server to respond back to the css.
If you don't want to have to nat all your traffic you need to use an acl to do this.
clause 10 permit any x.x.x.x destination content
clause 99 permit any any dest any
Replace x.x.x.x with a server ip.
Create a similar clause for each server.
The vip in the group can be the same as the content rule vip or any other ip address that will belong to the CSS.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...