09-03-2008 12:59 PM
Hi,
Can load balancing be done behind a firewall with CSS. For e.g. CSS (on the outside of the firewall) load balances on the servers connected to the DMZ of the firewall.
If so, should there be any performance issues. And what if the firewall had IPS functionality as well.
Regards.
Solved! Go to Solution.
09-04-2008 04:43 AM
It can be done. You need to make sure
1. Holes are punched in the Firewall form probe traffic (CSS -> Servers)
2. Return traffic from the servers should not Bypass the CSS. (Firewall should handover the responses from servers back to CSS). You can use source nat on CSS for this purpose.
Thanks
Syed Iftekhar Ahmed
09-04-2008 04:43 AM
It can be done. You need to make sure
1. Holes are punched in the Firewall form probe traffic (CSS -> Servers)
2. Return traffic from the servers should not Bypass the CSS. (Firewall should handover the responses from servers back to CSS). You can use source nat on CSS for this purpose.
Thanks
Syed Iftekhar Ahmed
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: