We have a 2811 router with VPN and NAT configured. We have two internet connection from different ISPs. The speed of our original connection is 2MB up and down. The speed of our new connection is 1MB up and down. We want to configure load balancing between the two connections. Our new ISP has provided us with a CISCO 837 router. We want to connect that router into our 2811 on one of the free WIC card and then configure load balancing between the two interfaces on our 2811. The third interface has a local address configured. Please suggest where to start. I tried searching on net for any configuration example but I was unable to find any particular example with commands. I am new on CISCO platform. Any help will be hugely appreciated. Thanks in advance.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...