you have to confirm that, you are running WAAS version 4.0.13, correct. If it is incorrect please install it.Please make sure that the EPM Adaptor is disabled through the CLI on each WAE. In the waas-ace design guide the traffic flow is from client to rserver
with a redirect to a wae-farm in the middle. for traffic leaving the waas interface that does not match a service policy to be load-balanced, ace would just route it. then would the mac-sticky which is associated with that outbound connection cause the return traffic to come back to the same wae, even though it is not a defined rserver endpoint?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...