Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Make CSS11500 like Local Director

Is it possible to make a CSS11500 behave like a local director. ie. to bridge between vlans without IP's on its interfaces. If the CSS cannot operate in this manner then it will require major network changes to implement as a one armed configuration masks the source IP's which on a load balance mail platform is unacceptable.

Thanks,

Richard

  • Application Networking
2 REPLIES
New Member

Re: Make CSS11500 like Local Director

Richard,

you definately can have the CSS operate with one vlan so it bridges, like the LocalDirector. It will, however, require that it has a vlan address. The servers can remain on the same addresses, however.

-Steve

New Member

Re: Make CSS11500 like Local Director

Is there a configuration example of this.

Thanks,

Richard

106
Views
0
Helpful
2
Replies