It depends on which Cache Engine product (CE500 is a series of products) and what software/features youd be using. (i.e. Cache, E-CDN, I-CDN)
For caching, the performance depends on the traffic mix. HTTP Transparent Proxy Caching (TPC) (typical hit-rate 30-35%) is lower performance than Reverse Proxy Cache (RPC) (hit-rate 80+%). Streaming-media is different again.
For just caching and TPC of HTTP traffic, the performance numbers I received from Cisco are:
CE507: branch-office (T1/E1) -- up to 10mbit/s TPC
CE560+halfSA6: half-DS3 (22mbit/s) TPC
CE590+SA6: DS3 (45mbit/s) TPC
These numbers are significantly higher with RPC, perhaps double. Exact numbers in terms of HTTP Req/sec can be calculated using aggregate mbit/s numbers above and the average http object size of the Internet. Your Cisco rep should be able to draw up specifics for you as well.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...