Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Migrating Local Director to CSM - commands "name" "oos"

On a CSM v4.2(3) on a 6509: I'm trying to make the real servers have names (like on the local director) instead of IP addresses:

VOC-SW15#conf t

Enter configuration commands, one per line. End with CNTL/Z.

VOC-SW15(config)#mod csm 4

VOC-SW15(config-module-csm)#serverfarm TEST1

VOC-SW15(config-slb-sfarm)#real ?

A.B.C.D real server IP address

name use a named real server

VOC-SW15(config-slb-sfarm)#real name webtest

% Config not found for module real WEBTEST

VOC-SW15(config-slb-sfarm)#real name ?

WORD real server name

VOC-SW15(config-slb-sfarm)#real name webtest

% Config not found for module real WEBTEST

VOC-SW15(config-slb-sfarm)#

VOC-SW15(config-slb-sfarm)#real webtest

VOC-SW15(config-slb-module-real)#address 10.1.250.37

This is what I end up with (I want the real server under server farm test1:

real WEBTEST

address 10.1.250.37

serverfarm TEST1

nat server

no nat client

real 10.1.250.38

inservice

Also, if anyone has an easy way to take a box out of service (like on the local director) please let me know. On CSM we're having to do this:

VOC-SW15#conf t

VOC-SW15(config)#mod csm 4

VOC-SW15(config-module-csm)#serverfarm relays

VOC-SW15(config-slb-sfarm)#real 10.1.11.23

VOC-SW15(config-slb-real)#no inservice

on ld it was just: oos real relay-01

Thank you for all the posts. They have been tremendous help in getting the CSM in production.

ps (Gilles, My Christmas wish is that you're working on a CSS/CSM Book for Cisco Press. One is definately needed)

Thank you, Sheila

1 REPLY
New Member

Re: Migrating Local Director to CSM - commands "name" "oos"

We figured out the name configuration.

!

real MLXWEBTEST

address 10.1.250.36

inservice

!

serverfarm TEST1

nat server

no nat client

real 10.1.250.38

inservice

real name MLXWEBTEST

no inservice

real server farm weight state conns/hits

-------------------------------------------------------------------------

10.1.250.38 TEST1 8 OPERATIONAL 0

MLXWEBTEST TEST1 8 OUTOFSERVICE 0

Is this the best configuration? We have to migrate

250+ servers over to the CSM. Thanks, sheila

119
Views
0
Helpful
1
Replies
CreatePlease login to create content