I did some searching but came up empty handed. We recently purchased 2 ACE 6509E bundles. I have established http/https management connectivity to the ACE modules. However when I log in with the admin account I only see an option for the csm2ace conversion tool. There is not one listed for the css2ace conversion tool. Is this a separate install or license? I was relying on that tool to help me with a migration project.
Kindly tell if this information is of any use to you as we are also doing lot of migration these days but not using this tool as our network is much vast and diversified so all the config we are translating manually.
Right now we are migrating from our CSS to ACE.
If any furhter help in this regard , please revert without hesitation.
Hi Sachin, thank you for your reply. Unfortunately I cannot even access the CSS-to-ACE conversion tool on my ACE module. I only have the option for the CSM-to-ACE tool. In looking at the ACE documention I should also have the CSS-to-ACE tool but it does not give me the option.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...