I still have some old 3660 routers running 123-15 IOS in my network, I am wondering whether these routers level of WCCP will work with 4.1.3a, presently I am running 4.1.1c. the majority of the routers are 2851s running 124-15.T8 so should not be a problem upgrading to 4.1.3a..so would there be any problems if I left the WAEs at the 3660 sites running 4.1.1c and upgrqade the others to 4.1.3a?
We have a mix of 4.1.1c, 4.1.3, 4.1.3a, and 4.1.3b, and all are functioning without a problem. I agree with Zach, if you are running WCCP on these devices today, you should not have a problem when you upgrade them to the new code.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...