Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Monitoring cpu and mem in ACE/GSS

Hello,

I tried to monitor CPU and memory variables of ACE and GSS devices, however I have obtained the following results:

1. I only been able to obtain laboratory results for the variable cpu in the GSS device, but to consult the GSS device located in client I don't get answers from the object (cpu variable). The OID's for monitoring CPU, which are contained in the CISCO-PROCESS_MIB:

- CpmCPUTotal1minRev 1.3.6.1.4.1.9.9.109.1.1.1.1.7
- CpmCPUTotal5minRev 1.3.6.1.4.1.9.9.109.1.1.1.1.8


Both client and consulted laboratory devices have the same characteristics. GSS 4490 v3.1 (1).

What migth be the reason for no getting answers from the cpu variable on customer's device, considering that the tests were conducted under the same hardware and software??

2. On the other hand, I'm trying to consult the OID memAvailReal which is contained in the UCD-SNMP-MIB, but I did not get answers to any device (ACE and GSS), neither in client or laboratory.

Regards,
Gabriel Pinto

1 REPLY
New Member

Re: Monitoring cpu and mem in ACE/GSS

A3(2.3)).The ACE 4710 version is A3(2.3) in both cases, lab and client.

525
Views
0
Helpful
1
Replies