I am attaching a script of a CSS 11503 with four services configured and one content either. So, i am actually having problems with this configuration, because when all the services are active, it works perfect, however when one service goes down, the content begins behaving as all services were down. Then, how can i get successfully that the rest of services work well when one service goes down??....how can i monitor it under this condition???
The idea of the first paragraph is getting the best practice for balance services for a business suite oracle release 12, besides of get a balance correctly when one or more services are not working.
!************************** SERVICE ************************** service apache ip address 10.60.4.24 keepalive port 8001 keepalive uri "/check.txt" keepalive type http active
service apache1 ip address 10.60.4.23 keepalive port 8001 keepalive uri "/check.txt" keepalive type http active
service apache2 ip address 10.60.4.34 keepalive port 8001 keepalive uri "/check.txt" keepalive type http active
service apache3 ip address 10.60.4.33 keepalive type http keepalive port 8001 keepalive uri "/check.txt" active
1. Are you sure that the remaining services are alive when you notice one goes down?
2. Do existing connections, when the service goes down, appear to not be sent to another service?
3. Do new connections work?
4. Is it necessary to have a Layer 5 rule (ie. url "/*")? Removing that line and keeping it layer 4 may suffice and increase performance.
You might consider disabling content rule persistence by issuing the 'no persistent' command within the content rule. You may also want to implement 'persistence reset remap' in the global config, as the default is a redirect.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...